DK8X Motherboard |
|
<F8> Key | Load Failsafe Defaults |
<F9> Key | Load Optimal Defaults |
<F10> Key | Save and Exit |
Home | Go to Top of Screen |
END | Go to Bottom of Screen |
ESC | Exit |
IMPORTANT
The BIOS does NOT automatically save values that you have modified. If you do not save your values before you exit the BIOS Setup Utility, all your changes will be lost.
If after making and saving system changes with the BIOS Setup Utility, you discover that your computer is no longer able to boot, the AMIBIOS supports an override, which will reset your system to the Failsafe defaults. If that fails, it is possible to manually clear the present CMOS information through the "Clear CMOS Header" on the motherboard (Refer to Jumper Settings for more information).
The best advice is to ONLY alter settings which you thoroughly understand. The default settings have been carefully chosen by AMIBIOS to provide the maximum system performance and reliability. Even a slight change to the chipset setup may cause potential and unpredictable failure to the system.
________________________________________________________________________
BIOS Setup |
