Connection to Your PC
Be sure to install the DSS Player software before connecting the Directrec to the PC. However, if you do connect the Directrec before or during the software installation, the “Add New Hardware Wizard” will appear. In this case, cancel the wizard by pressing the [Cancel] button in the wizard screen and then install or continue the installation of DSS Player software.
Connecting to your PC Using the USB Cable
1 Connect the Directrec USB cable directly into the USB port or USB hub of your PC.
Disconnecting from Your PC
1 Disconnect the Directrec USB cable from your PC USB port or USB hub.
..............................................................................................................................
Notes
•Some PCs and USB hubs may not supply sufficient power and the Directrec fails to connect. Refer to your PC User’s Manual regarding the USB port or USB hub on your PC.
•When using a USB hub to connect the Directrec, always use a
•Never disconnect the USB code while the record/play indicator light is flashing. If you do, the data will be destroyed.
9
