61

Regulatory Information
The 3Com AirConnect 9550 11n 2.4+5GHz PoE Access Point (WL-605) / 3Com AirConnect 9150 11n 2.4GHz
PoE Access Point must be installed and used in strict accordance with the manufacturer’s instructions as
described in the user documentation that comes with the product.
This
prod
uct con
tains
enc
r
ypti
on.
It
is
unlawful to expor
t
ou
t of the U.S.
w
i
tho
u
t obtain
i
ng a
U
.
S.
Expo
rt
Li
cens
e.
This product does not contain any user serviceable components. Any unauthorized product changes or
modifications will invalidate 3Com’s warranty and all applicable regulatory certifications and approvals.
Only antennas specified for your region by 3Com can be used with this product. The use of external amplifiers or
non-3Com antennas may invalidate regulatory certifications and approvals.
This product can be used with the following antennas and accessories:

CAUTION: EXPOSURE TO RADIO FREQUENCY RADIATION

This device generates and radiates radio-frequency energy. In order to comply with FCC radio-frequency
exposure guidelines for an uncontrolled environment, this equipment must be installed and operated while
maintaining a minimum body to antenna distance of 20 cm (approximately 8 in.).
The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not
emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable
from Health Canada’s website www.hc-sc.gc.ca/rpb.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users
must follow the specific operating instructions for satisfying RF exposure compliance. This equipment should be
installed and operated with minimum distance 20 cm between the radiator and your body.
This product must maintain a minimum body to antenna distance of 20 cm. Under these conditions this product
will meet the Basic Restriction limits of 1999/519/EC [Council Recommendation of 12 July 1999 on the limitation
of exposure of the general public to electromagnetic fields (0 Hz to 300 GHz)].

US — RADIO FREQUENCY REQUIREMENTS

This device must not be co-located or operated in conjunction with any other antenna or transmitter.
This device is for indoor use only when using channels 36, 40, 44 or 48 in the 5.15 to 5.25 GHz frequency range.
High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These
radar stations can cause interference with and/or damage this device.
Item Description Restrictions
— Supplied antenna
3CWE591 3Com 6/8dBi Dual-Band Omni Antenna Must be used with 3CWE586 and one of
the following: 3CWE580, 3CWE581 or
3CWE582.
3CWE596 3Com 18/20dBi Dual-Band Panel Antenna Must be used with 3CWE586 and one of
the following: 3CWE580, 3CWE581 or
3CWE582.
3CWE598 3Com® 8/10dBi Dual-Band Panel Antenna Must be used with 3CWE586 and one of
the following: 3CWE580, 3CWE581 or
3CWE582.
3CWE580 3Com Ultra Low Loss 6-Foot Antenna Cable Must also use 3CWE586. Cannot be used
with supplied antenna or 3CWE501.
3CWE581 3Com Ultra Low Loss 20-Foot Antenna Cable Must also use 3CWE586. Cannot be used
with supplied antenna or 3CWE501.
3CWE582 3Com Ultra Low Loss 50-Foot Antenna Cable Must also use 3CWE586. Cannot be used
with supplied antenna or 3CWE501.
3CWE586 3Com RSMA to SMA 6-inch Antenna Cable Required for all external antennas, except
that supplied with the AP and 3CWE501.
i