Configuring VoIP
Serial Connection Establishment Timeout
Range | 1 to 200. Specified in 50 ms increments. |
|
|
Default | 100 |
|
|
Description | Specifies the time SoTCP waits for connection establishment with |
| the serial device. |
| When a node receives a call request from a source node, the |
| SoTCP will send a Call Request packet to the serial protocol and |
| waits for a Call Accept packet. If the SoTCP protocol does not |
| receive a Call Accept packet within the timeout, it sends a Call |
| Clear packet to the source node. |
|
|
Boot Type | SoTCP Boot |
|
|
TCP Connection Establishment or Clearing Timeout | |
|
|
Range | 1 to 200. Specified in 50 ms increments. |
|
|
Default | 100 |
|
|
Description | Specifies the time SoTCP waits for the connection establishment |
| or connection clearing with the peer SoTCP protocol. |
|
|
Boot Type | SoTCP Boot |
|
|
TCP Keep Alive Timer | |
|
|
Range | Enabled, Disabled |
|
|
Default | Enabled |
|
|
Description | Used to enable or disable the TCP Keep Alive Timer. |
| • Enabled: TCP protocol sends keep alive packets over the |
| network at a one minute interval. If the destination node does |
| not respond to the keep alive packets, source node clears TCP |
| sessions. |
| • Disabled: TCP protocol does not send keep alive packets over |
| the network. |
|
|
Boot Type | SoTCP Boot |
|
|
|
|
14 | Voice Over IP |