Configuring VoIP
Route Selection Table Parameters
Parameters | These Route Selection Table parameters should be configured: | |
|
| Note |
|
| |
|
| |
|
| A table boot is required for changes to these parameters to take affect. |
Entry Number
Range | 1 to 16 |
|
|
Default | 1 |
|
|
Description | Specifies the number used to reference this table record. |
|
|
Address
Range | 0 to 15 digits |
|
|
Default | blank |
|
|
Description | Specifies the network address for calls routed beyond this node. |
|
|
Destination #1
Range | 0 to 32 alphanumeric characters. Use space to blank the field. |
|
|
Default | blank |
|
|
Description | Specifies the destination to which calls are routed. Enter SoTCP. |
|
|
|
|
Voice Over IP | 15 |
Revision 5.2 |
