Concord 33
Source information is shown in the following table.
Using a Touchtone Phone to Operate Your System
Your system may be equipped with a Phone Interface and V oice Module that allows system oper-
ation from a Touchtone phone on or off the premises.
The module contains a digital-voice chip, enabling programmed text to be spoken through the
phone and/or broadcast through interior speakers. Except for custom words, the voice will speak
the text that appears on alphanumeric touchpads in the system.
Phone Command Prefix
What distinguishes a call to the panel from any other out-going or incoming call is the use of the
Phone Command Prefix:
• In the case of on-site operation, if the Phone Command Prefix is dialed first (within 5 seconds
of picking up the phone), the panel pricks up its ears and waits for a valid access code or com-
mand.
• If the system is being accessed remotely, the Phone Command Prefix is used in conjunction
with the access code.
The prefix is usually #, but can be changed to * by the installer. If your prefix has been changed,
use * as the first key you press instead of #.
Detail Screen Display User
U001 - U096 Wireless Touchpad or Keyfob
U600 - U829 Regular User Codes 000 - 229
U830 Partition 1 Master Code
U831 Partition 2 Master Code
U838 Partition 1 Duress Code
U839 Partition 2 Duress Code
U846 System Master Code
U847 Installer Code
U848 Dealer Code
U849 AVM Code
U850 Quick Arming
U851 Keyswitch Arming
U852 System
Detail Screen Display Source
S00 Premise Phone
S01 Phone During Conversation
S02 Remote Phone
S06 Auto Stay Arming
S08 Keyswitch Arming Zone
S09 System
S1xx (xx = Zone Number) Keychain Touchpad
S1xx (xx = Zone Number) Wireless Touchpad
S3xx (xx = Bus Unit Number) Alphanumeric Touchpad
S6xx (xx = Bus Unit Number) Fixed Display Touchpad