Maintenance

The case sealer has been designed for long, trouble free service. The machine will perform best when it receives routine maintenance and cleaning.

Machine components that fail or wear excessively should be promptly repaired or replaced to prevent damage to other portions of the machine or to the product.

WARNING – Turn off electrical power supply and disconnect power

cord from electrical supply before beginning maintenance. If electrical power is not disconnected, severe injury to personnel could result.

Cleaning

Note – Never attempt to remove dirt from taping heads by blowing it out with compressed air. This can cause the dirt to be blown inside the motor and onto sliding surfaces which may cause premature equipment wear. Never wash down or subject equipment to conditions causing moisture condensation on components. Serious equipment damage could result.

Regular slotted containers produce a great deal of dust and paper chips when processed or handled in equipment. If this dust is allowed to build-up on machine components, it can cause component wear and overheating of drive motor. The dust build-up can best be removed from the machine by a shop vacuum. Depending on the number and type of boxes sealed in the case sealer, this cleaning should be done approximately once per month. If the boxes sealed are dirty, or if the environment in which the machine operates is dusty, cleaning on a more frequent basis may be necessary. Excessive dirt build-up that cannot be removed by vacuuming should be wiped off with a damp cloth.

Lubrication

Most of the machine bearings, including the drive motor, are permanently lubricated and sealed and do not require additional lubricant.

Figure 4-1 illustrates the machine points that do require lubrication every 250 hours of operation.

Lubricate the points indicated by arrows ( ) with a small amount of multi-purpose grease.

Note – Wipe off excess oil and grease. It will attract dust which can cause premature equipment wear and jamming. Take care that oil and grease are not left on the surface of rollers around which tape is threaded, as it can contaminate the tape's adhesive.

TAPING HEAD LUBRICATION – See Section II, "Maintenance – Lubrication", page 10.

Figure 4-1 – Lubrication Points – Frame

17

Page 22
Image 22
3M 200a manual Maintenance, Lubrication

200a specifications

The 3M 200A is a versatile and high-performance air filtration product designed to enhance indoor air quality across various environments. Renowned for its effectiveness and efficiency, the 3M 200A employs cutting-edge technologies and features that cater to both residential and commercial applications.

One of the main features of the 3M 200A is its advanced filtration system. The product utilizes a HEPA (High-Efficiency Particulate Air) filter, which is capable of capturing up to 99.97% of airborne particles as small as 0.3 microns. This includes dust, pollen, mold spores, and pet dander, making it an ideal choice for allergy sufferers and those concerned about air quality. Additionally, the filter is designed to last longer than traditional filters, reducing the frequency of replacements and minimizing waste.

The 3M 200A also incorporates innovative technologies such as the Microforce filtration technology. This proprietary technology enhances the efficiency of particle capture while maintaining optimal airflow. By maximizing filter performance, the Microforce technology not only improves air quality but also reduces energy consumption, making the unit environmentally friendly.

Another significant characteristic of the 3M 200A is its user-friendly design. The product features a sleek and modern aesthetic that allows it to seamlessly blend into various interior styles. Its intuitive control panel ensures ease of use, allowing users to adjust settings with just a few taps. Furthermore, the 3M 200A is equipped with real-time air quality monitoring, providing users with valuable insights into their indoor environment.

In terms of performance, the 3M 200A operates quietly, ensuring minimal disruption during use. This feature is particularly beneficial in settings like bedrooms, offices, and hospitals, where peaceful environments are essential. Its compact size also makes it easy to position the unit in various spaces without sacrificing performance.

Overall, the 3M 200A stands out as a remarkable solution for improving indoor air quality. With its advanced filtration capabilities, innovative technologies, user-friendly design, and quiet operation, it is a reliable choice for anyone looking to breathe easier and maintain a healthier living environment. Whether used at home or in commercial settings, the 3M 200A is built to deliver optimal air purification, ensuring peace of mind for its users.