Special Set-Up Procedure
WARNING – Turn off electrical power and disconnect power cord from electrical supply before beginning Special
personnel could result.
Changing the Tape Leg Length
(From 70 to 50 mm
The following changes to the case sealer frame and upper/lower taping heads will allow the taping of boxes 90 mm [3.5 inch] minimum height.
CASE SEALER FRAME (Refer to Figure
1.Raise the upper head assembly by turning crank handle counterclockwise. Remove and retain the two stop bracket screws and washers from the normal position holes
2.Move stop bracket down and secure with original fasteners through upper holes "A" in stop bracket. Relocate both right and left stop brackets.
Figure
23