Toshiba RAV-SM1101BT-E, RAV-SM1400AT-E, RAV-SM1100AT-E 113, No. Part name Procedure Remarks

No. Part name Procedure Remarks

Š Fan guard	1. Detachment
	1) Perform the works in 1 of • and in 1 of ‚.	Air-outlet
		cabinet
	REQUIREMENT
	To prevent damage on the products, treat	Bell-mouth
	component on a corrugated paper, cloth,
	etc.	Screws
		(2 pcs)
		Remove

2)Remove the air-outlet cabinet, and then put down it directing the fan guard side

downward.	Bell-mouth
3) Take off screws fixing the bell-mouth.
(ST1T Ø4 × 10, 2 pcs)

4)Remove the bell-mouth.

5)Take off screws fixing the fan guard. (ST1T Ø4 × 10, 2 pcs)

6)Remove hanging hook of the fan guard by pushing with a minus screwdriver.

2. Attachment
1) Insert the extrusion at the upper side of		Air-outlet cabinet
the fan guard into the square hole of the	Minus screwdriver	Fan guard
air-outlet cabinet, and then insert the
hanging hook. Fix the hanging hooks
(5 positions) by pushing with hands.

REQUIREMENT

Check that all the hanging hooks are fixed to the specified positions.

2)After attachment, fix it with screws. (ST1T Ø4 × 10, 2 pcs)

3) Mount the bell-mouth by hanging hooks	Hanging hook	Air-outlet cabinet
(3 positions) at upper side of the bell-
mouth to the square holes of the air-outlet
cabinet.

4)After attachment, fix it with screws. (ST1T Ø4 × 10, 2 pcs)

* Caution in assembling bell-mouth
• The size (color) of the bell-mouth at
upper side differs from that at lower side.
(Only for RAV-SM1100AT-4C)	Square holes (3 positions)
<In case of RAV-SM1100AT-E>	Bell-mouth
Upper side: Black
Lower side: Gray
<In case of RAV-SM1400AT-E>
Upper side: Black
Lower side: Black

Hooks (3 positions)

113