Toshiba RAV-SM1101BT-E, RAV-SM1400AT-E Detachment, Attachment, Part name, Procedure, Remarks

No.	Part name	Procedure	Remarks
‚ Air-outlet cabinet 1.		Detachment	Heat exchanger	Air-outlet cabinet
	1)	Perform the work in 1 of •.
	2)	Take off screws for the air-outlet cabinet
		and the partition plate.
		(ST1T Ø4 × 10, 3 pcs.)
	3)	Take off screws for the air-outlet cabinet
		and the base plate.
		(ST1T Ø4 × 10, 2 pcs.)
	4)	Take off screw for the air-outlet cabinet
		and the heat exchanger.
		(ST1T Ø4 × 10, 1 pc.)
	5)	Take off screws for the air-outlet cabinet
		and the fin guard.
		(ST1T Ø4 × 10, 2 pcs.)
			Finguard
	2. Attachment
	1)	Put the upper left side of the air-outlet	Upper side of the end
		cabinet on the end plate of heat ex-	plate of heat exchanger
		changer, and fix it with screw.
		(ST1T Ø4 × 10, 1 pc.)
	2)	Attach the taken-off screws to the
		original positions.

Air-outlet cabinet

ƒ	Side cabinet		•	Inverter	Side cabinet
		1) Perform the work in 1 of .
		2)	Take off screws fixing the inverter and
			the side cabinet.
			(ST1T Ø4 × 10, 2 pcs.)
		3)	Take off screws for the side cabinet and
			the valve fixed plate.
			(ST1T Ø4 × 10, 2 pcs.)
		4)	Take off screw for the side cabinet and
			the piping panel (Rear).
			(ST1T Ø4 × 10, 1 pc.)
		5)	Take off screw for the side cabinet and
			the base plate.
			(ST1T Ø4 × 10, 1 pc.)
		6)	Take off screws for the side cabinet and
			the fin guard.
			(ST1T Ø4 × 10, 4 pcs.)

Valve fixed plate Side cabinet

107