Toshiba RAV-SM1401BT-E, RAV-SM1400AT-E, RAV-SM1101BT-E F01 error/0F error, P26 error/14 error

[F01 error]/[0F error]

Is connection of TCJ sensor connector		NO
(Indoor P.C. board CN102) normal?
	YES

Correct connection of connector.

Are characteristics of

TCJ sensor resistance value normal?

YES

Check indoor P.C. board (MCC-1402).

Defect Replace

NO

* Refer to Characteristics-2.

Replace TCJ sensor.

[P26 error]/[14 error]

NO

Is power voltage normal?

	YES
		NO
Are connections of
cabling/connector normal?
YES

*For RAV-SM560AT-E,

check RY01 on the control P.C. board.

Improve the power supply line.

Check and correct circuit cables. Correct connection of connector. Check and correct reactor connection.

Does RY01 relay of	YES	Are not “P26” and “14” errors output	NO
		when an operation is performed by
IPDU operate?
		removing 3P connector of compressor?
NO		YES

*Single-phase type is not provided to RAV-SM560AT-E.

		YES						Replace IPDU.
			Is not AC fuse fused?
				NO			* Replace control P.C. board
								of RAV-SM560AT-E.
	Replace IPDU.							NO
					Is compressor normal?
* Replace control P.C. board
	of RAV-SM560AT-E.				YES
			Check IPDU.			Check rare short of compressor trouble.
			Defect Replace			Defect Replace

61