Toshiba RAV-SM1401BT-E, RAV-SM1400AT-E Flare tool for Conventional flare tool, Diameter

c)Insertion of Flare Nut

d)Flare Processing

Make certain that a clamp bar and copper pipe have been cleaned.

By means of the clamp bar, perform the flare processing correctly.

Use either a flare tool for R410A or conven- tional flare tool.

Flare processing dimensions differ according to the type of flare tool. When using a con- ventional flare tool, be sure to secure “dimen- sion A” by using a gauge for size adjustment.

ØD

A

Fig. 7-2-1 Flare processing dimensions

Table 7-2-3 Dimensions related to flare processing for R410A

		Outer					A (mm)
Nominal			Thickness
		diameter			Flare tool for		Conventional flare tool
diameter				(mm)
		(mm)
					R410A clutch type		Clutch type		Wing nut type
1/4	6.35		0.8		0 to 0.5		1.0 to 1.5			1.5 to 2.0
3/8	9.52		0.8		0 to 0.5		1.0 to 1.5			1.5 to 2.0
1/2	12.70		0.8		0 to 0.5		1.0 to 1.5			2.0 to 2.5
5/8	15.88		1.0		0 to 0.5		1.0 to 1.5			2.0 to 2.5
		Table 7-2-4 Dimensions related to flare processing for R22
		Outer					A (mm)
Nominal			Thickness
		diameter			Flare tool for		Conventional flare tool
diameter				(mm)
		(mm)
					R22 clutch type		Clutch type		Wing nut type
1/4	6.35		0.8		0 to 0.5		0.5 to 1.0			1.0 to 1.5
3/8	9.52		0.8		0 to 0.5		0.5 to 1.0			1.0 to 1.5
1/2	12.70		0.8		0 to 0.5		0.5 to 1.0			1.5 to 2.0
5/8	15.88		1.0		0 to 0.5		0.5 to 1.0			1.5 to 2.0
		Table 7-2-5 Flare and flare nut dimensions for R410A
Nominal		Outer diameter		Thickness		Dimension (mm)				Flare nut
diameter		(mm)		(mm)	A	B	C	D		width (mm)
1/4		6.35		0.8	9.1	9.2	6.5	13		17
3/8		9.52		0.8	13.2	13.5	9.7	20		22
1/2		12.70		0.8	16.6	16.0	12.9	23		26
5/8		15,88		1.0	19.7	19.0	16.0	25		29

25