Toshiba RAV-SM801BT-E, RAV-SM1400AT-E, RAV-SM1101BT-E, RAV-SM1100AT-E Push button if the unit stops

nConfirmation of indoor unit No. position

1. To know the indoor unit addresses though position of the indoor unit body is recognized

•In case of individual operation (Wired remote controller : indoor unit = 1 : 1) (Follow to the procedure during operation)

<Procedure>

1

2

Push button if the unit stops.

Push button.

Unit No. 1-1is displayed on LCD.

(It disappears after several seconds.)

The displayed unit No. indicate line address and indoor unit address.

(When other indoor units are connected to the identical remote controller (Group control unit), other unit numbers are also displayed every pushing button.

CODE No.

UNIT No.

UNIT

SET CL

2

1

Operation

<Operation procedure>

1 2 END

2.To know the position of indoor unit body by address

•To confirm the unit No. in the group control

(Follow to the procedure during operation) (in this procedure, the indoor units in group control stop.)

<Procedure>

The indoor unit numbers in the group control are succes- sively displayed, and fan, flap, and drain pump of the corresponding indoor unit are turned on. (Follow to the procedure during operation)

1 Push and buttons simultaneously for 4 seconds or more.

•Unit No. ALL is displayed.

•Fans and flaps of all the indoor units in the group control operate.

2 Every pushing button, the unit numbers in the group control are successively displayed.

•The unit No. displayed at the first time indicates the master unit address.

•Fan and flap of the selected indoor unit only operate.

3 Push button to finish the procedure. All the indoor units in the group control stop.

SET DATA

UNIT No.

R.C. No.

1

UNIT

SET CL

3 2

<Operation procedure>

1 2 3 END

87