Special Set-Up Procedure (Continued)

WARNING – Turn off electrical power and disconnect power cord from electrical supply before beginning Special Set-Up Procedure. If power cord is not disconnected, severe injury

to personnel could result.

TAPING HEADS

WARNING – Use care when working near knives as knives are extremely sharp. If care is not taken, severe injury to personnel could result.

1.Loosen, but do not remove, the two retaining screws that secure the upper taping head shown in Figure 6-1B.

2.Slide the head forward and lift straight up to remove it from the case sealer.

CAUTION – Taping head weighs approximately 7.2 kg [16 lbs]. Use proper body mechanics when lifting upper or lower taping heads.

3.Lift the lower taping head, shown in Figure 6-1C, straight up to remove it from the case sealer bed.

4.Refer to Section II, "Adjustments – Changing Tape Leg Length", page 13 for taping head set-up.

Box and Machine Bed Height Range – Refer to Figure 6-2

Moving the outer columns up one set of mounting holed increases the maximum box size handled by the 200a case sealer and decreases the minimum machine bed height.

Note – This also increases the minimum box height from 120 mm [4.75 inch] to 165 mm [6.5 inch].

To move the outer columns up one set of mounting holes:

1.Place minimum 305 mm [12 inch] high blocks at the front and rear of the upper taping head assembly as shown in Figure 6-2A. Important – Blocks (front and rear) must be same height in order to keep upper taping head assembly parallel with machine bed/drive belts. Crank the upper taping head assembly down until it touches these blocks.

2.Remove and retain the six screws and plain washers that fasten each column to the frame. Figure 6-2B.

3.Turn the height adjustment crank clockwise to raise the outer columns up one set of mounting holes (100 mm [4 inch]).

WARNING – Blocks and spacers must be capable of supporting the 34 Kg [75 pound] weight of the outer columns and upper taping head assembly.

4.Install and tighten the six screws and plain washers in each column that were removed in Step 2. Crank upper taping head assembly up and remove blocks.

If desired, the bed height can now be decreased to 520 mm [20.5 inch] by adjusting legs upward. (See "Installation and Set-Up – Machine Bed Height", Page 11.)

24

Page 29
Image 29
3M 200a manual To personnel could result, Box and Machine Bed Height Range Refer to Figure

200a specifications

The 3M 200A is a versatile and high-performance air filtration product designed to enhance indoor air quality across various environments. Renowned for its effectiveness and efficiency, the 3M 200A employs cutting-edge technologies and features that cater to both residential and commercial applications.

One of the main features of the 3M 200A is its advanced filtration system. The product utilizes a HEPA (High-Efficiency Particulate Air) filter, which is capable of capturing up to 99.97% of airborne particles as small as 0.3 microns. This includes dust, pollen, mold spores, and pet dander, making it an ideal choice for allergy sufferers and those concerned about air quality. Additionally, the filter is designed to last longer than traditional filters, reducing the frequency of replacements and minimizing waste.

The 3M 200A also incorporates innovative technologies such as the Microforce filtration technology. This proprietary technology enhances the efficiency of particle capture while maintaining optimal airflow. By maximizing filter performance, the Microforce technology not only improves air quality but also reduces energy consumption, making the unit environmentally friendly.

Another significant characteristic of the 3M 200A is its user-friendly design. The product features a sleek and modern aesthetic that allows it to seamlessly blend into various interior styles. Its intuitive control panel ensures ease of use, allowing users to adjust settings with just a few taps. Furthermore, the 3M 200A is equipped with real-time air quality monitoring, providing users with valuable insights into their indoor environment.

In terms of performance, the 3M 200A operates quietly, ensuring minimal disruption during use. This feature is particularly beneficial in settings like bedrooms, offices, and hospitals, where peaceful environments are essential. Its compact size also makes it easy to position the unit in various spaces without sacrificing performance.

Overall, the 3M 200A stands out as a remarkable solution for improving indoor air quality. With its advanced filtration capabilities, innovative technologies, user-friendly design, and quiet operation, it is a reliable choice for anyone looking to breathe easier and maintain a healthier living environment. Whether used at home or in commercial settings, the 3M 200A is built to deliver optimal air purification, ensuring peace of mind for its users.