Special Set-Up Procedure (Continued)

Changing the Tape Leg Length (from 70 to 50 mm [2-3/4 to 2 inches])

The following changes to the case sealer frame and upper/lower taping heads will allow the taping of boxes 95 mm [3-3/4 inch] minimum height with box widths greater than 195 mm [7-3/4 inch].

CASE SEALER FRAME

1.Crank upper taping head frame up high enough to allow clearance for removal of lower taping.

2.Remove the stop bracket (Figure 6-3C) from normal position "A" and fasten in lower position "A-A". Relocate stop brackets on both columns.

TAPING HEADS

WARNING – Use care when working near tape cut-off knife on taping heads as knife is extremely sharp and could cause severe injury

1.Remove tape rolls from both upper and lower taping heads.

2.Loosen, but do not remove, the two retaining screws that secure the upper taping head. See Figure 6-3A. Slide the head forward and lift straight up to remove it from case sealer.

CAUTION – Taping heads weigh approximately 7.2 kg [16 lbs]. Use proper body mechanics when lifting or holding taping head.

3.Lift the lower taping head, shown in Figure 6-3B, straight up to remove it from the machine bed.

4.Refer to Section II, Adjustments – Changing Tape Leg Length" page 13 for taping head set-up.

5.Replace taping heads in case sealer, reverse of disassembly.

Figure 6-3 – Removing Taping Heads from Case Sealer

34

Page 38 Page 40
Page 39
Image 39
3M 39600 manual Taping Heads
Page 38 Page 40

39600 specifications

The 3M 39600 is a high-quality, versatile adhesive designed to meet the needs of professionals across various industries. This product is particularly well-regarded for its exceptional bonding capabilities and ease of use, making it a popular choice among contractors, automotive professionals, and DIY enthusiasts alike.

One of the main features of the 3M 39600 is its strong adhesion to a wide range of substrates. This includes metals, plastics, glass, and composites, allowing users to bond different materials seamlessly. The adhesive forms a strong, durable bond that provides long-lasting performance, making it suitable for both interior and exterior applications.

Another key characteristic of the 3M 39600 is its fast curing time. The adhesive typically sets quickly, which is crucial in fast-paced work environments where time is of the essence. This rapid curing allows users to proceed with their projects without long wait times. Additionally, the adhesive exhibits high resistance to moisture and temperature fluctuations, ensuring that the bond remains secure even in challenging environmental conditions.

The technology behind the 3M 39600 is based on advanced polymer chemistry, which contributes to its reliable performance. The formulation of the adhesive results in excellent shear strength and tensile strength, making it ideal for demanding applications. The product is also designed to be user-friendly; it can be applied using various methods such as brush, roller, or spray, depending on the specific requirements of the project.

3M 39600 is often recognized for its versatility. It is suitable for applications in industries like automotive, construction, electronics, and appliance manufacturing. In the automotive sector, for example, it is used for bonding parts together, ensuring structural integrity and enhancing both performance and aesthetics.

In summary, the 3M 39600 adhesive is a top choice for those seeking a reliable and efficient bonding solution. Its strong adhesion, fast curing time, and advanced technology make it suitable for a variety of applications. Whether you are a professional or a DIY enthusiast, the 3M 39600 provides the performance you need to achieve quality results in your projects.
Top Page Image Contents