Special Set-Up Procedure (Continued)

Outer Column Re-Positioning (Refer to Figure 6-4)

Moving the outer columns up one set of mounting holes increases the maximum box size handled by the case sealer from 620 mm [24-1/2 inches] to 725 mm [28-1/2 inches].

WARNING – It is recommended that no less than two people assist on this set-up or severe injury or equipment damage could result.

To move the outer columns up one set of mounting holes:

1.Crank side drive belts to full open position.

2.Crank upper taping head frame assembly up approximately 330 mm [13 inches] from machine bed.

3.Place solid blocks approximately 305 mm [12 inches] high beneath upper taping head frame at rear of taping head and under front flap folding ski (Figure 6-4A).

Note –Blocks (front and rear) must be the same height in order to keep upper frame level.

4.Crank upper taping head frame down until weight of upper frame is fully on blocks.

5.Remove and retain six mounting screws in each outer column assembly (Figure 6-4B).

WARNING – A second person should assist with this part of set-up to hold (steady) upper frame until columns are re-positioned and column screws are installed and tightened.

6.Crank outer column up 100 mm [4 inches] and re-install six (6) screws in each column. Tighten screws.

7.Crank upper taping head up and remove blocks.

8.Check horizontal alignment of upper taping head frame and adjust as described in "Adjustments – Upper Taping Head Leveling", page 30.

35

Page 39 Page 41
Page 40
Image 40
3M 39600 manual Outer Column Re-Positioning Refer to Figure
Page 39 Page 41

39600 specifications

The 3M 39600 is a high-quality, versatile adhesive designed to meet the needs of professionals across various industries. This product is particularly well-regarded for its exceptional bonding capabilities and ease of use, making it a popular choice among contractors, automotive professionals, and DIY enthusiasts alike.

One of the main features of the 3M 39600 is its strong adhesion to a wide range of substrates. This includes metals, plastics, glass, and composites, allowing users to bond different materials seamlessly. The adhesive forms a strong, durable bond that provides long-lasting performance, making it suitable for both interior and exterior applications.

Another key characteristic of the 3M 39600 is its fast curing time. The adhesive typically sets quickly, which is crucial in fast-paced work environments where time is of the essence. This rapid curing allows users to proceed with their projects without long wait times. Additionally, the adhesive exhibits high resistance to moisture and temperature fluctuations, ensuring that the bond remains secure even in challenging environmental conditions.

The technology behind the 3M 39600 is based on advanced polymer chemistry, which contributes to its reliable performance. The formulation of the adhesive results in excellent shear strength and tensile strength, making it ideal for demanding applications. The product is also designed to be user-friendly; it can be applied using various methods such as brush, roller, or spray, depending on the specific requirements of the project.

3M 39600 is often recognized for its versatility. It is suitable for applications in industries like automotive, construction, electronics, and appliance manufacturing. In the automotive sector, for example, it is used for bonding parts together, ensuring structural integrity and enhancing both performance and aesthetics.

In summary, the 3M 39600 adhesive is a top choice for those seeking a reliable and efficient bonding solution. Its strong adhesion, fast curing time, and advanced technology make it suitable for a variety of applications. Whether you are a professional or a DIY enthusiast, the 3M 39600 provides the performance you need to achieve quality results in your projects.
Top Page Image Contents