Operation (Continued)

WARNINGS

1.Turn electrical and air supply off and disconnect before servicing taping heads or performing any adjustments or maintenance on the machine. Turn electrical and air supplies off when machine is not in use.

2.Do not leave machine running unattended.

3.Before turning drive belts on, be sure no tools or other objects are on the machine bed.

4.Keep hands and loose clothing away from moving belts and flap kicker.

5.Keep away from flap kicker. Flap kicker is controlled by air and can be activated (if air supply is "On") by depressing flap kicker cam. Be sure flap kicker is in the down position before servicing.

6.Never attempt to remove jammed boxes from the machine while machine is running.

7.Machine access door must be closed when drive belts are running. Do not attempt to override door interlock switch.

8.Keep hands and clothing away from taping heads when machine is running. A box traveling through the machine causes taping head rollers to retract when box enters and extend as box leaves taping head.

9.Both the upper and lower taping heads utilize extremely sharp tape cut-off knives. The knife is located under the orange knife guard which has the "WARNING – SHARP KNIFE" label. Before loading tape, refer to Figures 3-1 and 3-2 in Section II to identify the knife location. Keep hands out of these areas except as necessary to service the taping heads.

10.Failure to comply with these warnings could result in severe personal injury and/or equipment damage.

Tape Loading/Threading – Upper Taping Head

See Section II, Pages 7 and 8

Tape Loading/Threading – Lower Taping Head With Tape Drum On Taping Head

See Section II, Pages 7 and 8

Tape Loading/Threading – Lower Taping Head With Alternate Outboard Tape Drum

1.Raise upper taping head high enough to allow clearance for removing lower taping head.

2.Remove lower taping head from machine bed and install threading needle as explained in Section II, page 7.

3.Replace taping head back into machine.

4.Place tape roll on outboard tape drum with adhesive side down on lead end of tape. (Seat tape roll fully against back flange of tape drum.) Thread tape through outboard tape rollers as shown in Figure 3-5 and adhere tape lead end to lower end of threading needle.

CAUTION – Taping head weighs approximately 7.2 kg [16 pounds]

without tape. Use proper body mechanics when removing or installing taping head.

5.Complete tape threading as explained in Section II, page 8.

18

Page 23
Image 23
3M 39600 manual See Section II, Pages 7

39600 specifications

The 3M 39600 is a high-quality, versatile adhesive designed to meet the needs of professionals across various industries. This product is particularly well-regarded for its exceptional bonding capabilities and ease of use, making it a popular choice among contractors, automotive professionals, and DIY enthusiasts alike.

One of the main features of the 3M 39600 is its strong adhesion to a wide range of substrates. This includes metals, plastics, glass, and composites, allowing users to bond different materials seamlessly. The adhesive forms a strong, durable bond that provides long-lasting performance, making it suitable for both interior and exterior applications.

Another key characteristic of the 3M 39600 is its fast curing time. The adhesive typically sets quickly, which is crucial in fast-paced work environments where time is of the essence. This rapid curing allows users to proceed with their projects without long wait times. Additionally, the adhesive exhibits high resistance to moisture and temperature fluctuations, ensuring that the bond remains secure even in challenging environmental conditions.

The technology behind the 3M 39600 is based on advanced polymer chemistry, which contributes to its reliable performance. The formulation of the adhesive results in excellent shear strength and tensile strength, making it ideal for demanding applications. The product is also designed to be user-friendly; it can be applied using various methods such as brush, roller, or spray, depending on the specific requirements of the project.

3M 39600 is often recognized for its versatility. It is suitable for applications in industries like automotive, construction, electronics, and appliance manufacturing. In the automotive sector, for example, it is used for bonding parts together, ensuring structural integrity and enhancing both performance and aesthetics.

In summary, the 3M 39600 adhesive is a top choice for those seeking a reliable and efficient bonding solution. Its strong adhesion, fast curing time, and advanced technology make it suitable for a variety of applications. Whether you are a professional or a DIY enthusiast, the 3M 39600 provides the performance you need to achieve quality results in your projects.