3M™ 2000 Series and 7093 Filter (Side Mounted) Asse mbly
1.Align opening of filter with filter attachment on facepiece.
2.Turn filter clockwise until it is firmly seated and cannot be further turned.
3.Repeat for second filter. (Fig. 2)
4.Check that a 6876 breathing tube gasket (gray) and 7890 plug has been installed in the center DIN port.
Fig. 2
Filter Assembly (for 3M™ 5N11 and 5P71 Filters)
1.Place filter into 3M™ 501 Retainer so printed sid e of filter faces the cartridge.
2.Press cartridge into filter retainer. It should snap securely into filter retainer. When correctly installed, filter should completely cover face of cartridge. (Fig. 3)
3.To replace filter, remove retainer by lifting on TAB.
Fig. 3
11