Manuals / 3M / Fitness & Sports / Snowshoes

3M 747 manual Introduction, Inspection, Package Contents

Models: 747

1 30

Download 30 pages 42.9 Kb

Page 3

Introduction

Introduction

Thank you for purchasing this 3M™ Shoes and Wrist Strap Tester 747. To get the maximum performance from the unit, please read this user’s guide first, and refer to it as needed.

Inspection

The AC adapter provided with the Shoes and Wrist Strap Tester 747 varies according to region. In North America, the Shoes and Wrist Strap Tester 747 is provided with the SA10-0910N AC adapter, while in Europe it is provided with the SA 10-0910G AC adapter. Before using the Shoes and Wrist Strap Tester 747, make sure that you have the correct AC adapter for your region.

When the unit is delivered, check and make sure that it has not been damaged, or fails to operate according to the specifications, contact your dealer or 3M representative.

Package Contents

AC Adapter	1
ESD Shoe Testing Cord	1
Wall-Mounting Board	1
3M™ Data Logging Software 747DLS	1
ESD Shoe Testing Plate	1
Mounting Screw for ESD Shoe Testing Plate (with washer)	1
Alkaline Battery	6
Null Modem Cable 1.8 m	1
Quick Guide Test Card	1

2

Image 3

3M 747 manual Introduction, Inspection, Package Contents

Contents

User’s Guide 3M Shoes and Wrist Strap TesterSection Table of ContentsIntroduction InspectionPackage Contents SAFETY INFORMATION Explanation of Safety Label Signal Words & SymbolsIntended Use AC adapter must have all local required regulatory certifications 1.1 Product Outline 1.0 OverviewLCD Indicators 1.2.3 Back Side 1.2.2 Side Panels2.1 Connecting the ESD Shoe Testing Plate 2.0 Preparation Before TestingLOW the measured resistance is below the lower threshold 2. Disconnect all cables from the Shoes and Wrist Strap Tester 2.3 Power Preparation 2.3.1 Installing and Replacing the Batteries1. Confirm that the power switch is turned off 4. Replace the battery cover securely2.3.2 AC Adapter Connection 2.4 Turning Power On and Off Turning Power OnTurning Power Off Power Saver Function2.5 Wall Mounting 3.0 Testing3.1 ESD Shoe Testing with the 3M Shoes and Wrist Strap Tester 3.2 ESD Wrist Strap Testing with the 3M Shoes and Wrist Strap Tester 4.1 Open Collector Output 4.0 External Output FunctionTest Result Output Settings Test Result Output TerminalInternal Circuit Open-Collector Output Shoe and Wrist Strap ALL Setting4.2 RS-232C Communications SpecificationsCable Connections 4.3 Card Reader Technical SpecificationsSerial Interface Specification PC ConnectionMeasurement Resistance Range 0 to 200.0 MΩ 5.0 Specifications5.1 Measurement Section Testing Thresholds6.0 Maintenance & Service 5.2 General Specifications for the 3M Shoes and Wrist Strap Tester6.1 Battery Replacement Indicator Err.1 6.2 Error MessagesError Message Solution6.4 Cleaning Testing Considerations7.0 Operational Verification Test Figure 1 Wrist Strap Test Set-up Testing Wrist Strap RangesEquipment Required Test Set-UpTesting Wrist Low Limit - Refer to Wrist Test Table Testing Wrist High Limits - Refer to Wrist Test TableWrist Test Table Testing Shoes Low Limits - Refer to Shoes Test Table Testing Shoe RangescULus Statement Regulatory InformationShoe Test Table WEEE StatementPage Important Notice Electronic Solutions Division Static Control Products