Installation and System Setup | 3M™ Digital Media System 800 Series |
Installation & System Setup
ENGLISH
Setting Up the Projector
1.Mount whiteboard/projection screen in desired location on wall if necessary. The top of the whiteboard/projecction screen should be at least 86" (2.18 m) from the floor.
Whiteboard/
86"Projection Screen
(2.18 m)
to floor
2.The Digital Media System 800 Series can project an image size between 50" (1,270 mm) and 85" (2,160 mm), measured diagonally (when mounted on the same plane as the projected surface). Measure the whiteboard
if necessary to determine the size image you intend to use.
30" | 50" |
|
|
(762 mm) | (1270 mm) | 51" | 85" |
|
| ||
|
| (1295 mm) | (2160 mm) |
| 40" |
|
|
| (1016 mm) |
|
|
|
|
| 68" |
|
|
| (1728 mm) |
3. (Digital Media System 800, 815 Only) Attach |
the paper mounting template to the wall above |
the whiteboard/projection screen. The center |
line of the template should be aligned with the |
center of the desired projection area. |
Align the appropriate line on the template with |
the top of the whiteboard/projection screen |
according to the image size. |
Ensure that the "level" line on the template is |
Wall
Mounting Template
Level
Align center line
Mounting screw location (1 of 5) Alignment for desired image size
level. Mark the five mounting screw locations |
on the wall. Remove the template. |
4. (Digital Media System 810 Only) Rest a |
mounting shim on the top of the whiteboard/ |
projection screen. The center line of the shim |
should be aligned with the center of the desired |
projection area. |
Mark the five mounting screw locations on the |
wall. Remove the shim. |
Whiteboard/Projection Screen
Wall
Shim
Align center line
Mounting screw location (1 of 5)
Whiteboard/Projection Screen
12 | © 3M 2007. All Rights Reserved. |