ENGLISH
Installation and System Setup | 3M™ Digital Media System 800 Series | |
10. Attach the safety cable securely to the wall with | Attach safety cable securely to stud or solid wall. | |
an appropriate anchor. | ||
Cable should have no slack. | ||
| ||
Note: Fully extend safety cable and then secure |
| |
to wall. If necessary, use tie wraps to minimize |
| |
cable slack. |
|
11. Slide the contol panel cable tab into the slot at the bottom left of the unit.
Power Cable
Control Panel Cable
12.Connect the control panel and power cables as shown.
14 | © 3M 2007. All Rights Reserved. |