3M C2167PW manual Setting Up Your Multi-Touch Chassis Display, Unpacking Your Touch Display

10 3M™ Multi-Touch Display User Guide

CHAPTER 2

Setting Up Your Multi-Touch Chassis Display

This chapter describes how to set up your 3M Touch Systems Multi-Touch Chassis Display. You need to complete the following tasks:

∙Unpack the components

∙Connect the video cable, touch display USB cables, and power cable

∙Power on the display and test your setup

∙If you are not running Windows® 7 (or Tablet PC), i nstall software from the enclosed CD.

Unpacking Your Touch Display

Carefully unpack the carton and inspect the contents. Your Multi-Touch Chassis Display includes the following cables and accessories:

∙USB communication cable

∙VGA video cables

∙DVI video cables

∙Power cable and DC power supply

∙Touch documentation and driver CD

∙Hardware kit -- 4 mounting brackets and (8) M4x8 screws

USB cable	DC power supply	Power cable	Remote key
			(sold separately)

VGA cable DVI cable Side brackets 8 (M4X8) Screws

3M Touch Systems, Inc. Proprietary Information – TSD-44310 REV B