3M™ Mobile Projector MP300
Remote Control
The 3M remote control controls the projector, or any MHL enabled device plugged into the projector.
Remove Protective Film
Before you can begin using the remote control, you must remove the protective film from the battery compartment. Remove the film as shown below.
Using the Remote
When using the remote control, point the remote control's infrared transmitter at the receiver on the projector. Sometimes you can control the projector by pointing the remote at the surface in front, beside, or above the projector. The remote control's range is up to 20 feet.
Note: Sun light and some indoor lighting may reduce the range of the remote control.
24 | © 2012 3M. All Rights Reserved. |
