TURNING ON THE POWER
Precautions
Connect all devices to be used to the projector prior to turning on the power. 8 ～ 12
WARNING When the power is ON, a strong light is emitted. Do not look into the lens.
LASER
INDICATOR
STANDBY/ON VIDEO RGB
UP
FOCUS ZOOM PAGE
DOWN
1 | Make sure that the power cord is firmly and |
| correctly connected to the projector and outlet |
| 3 |
|
|
|
|
BLANKLASER
Turn on the projector's power
2 Set the power switch to [ ] (ON). The STANDBY/ON indicator will light to solid orange.
power switch
Control panel
STANDBY/ON indicator
NOTE Turn the power on/off in right order.
•Power on the projector before the computer or video tape recorder.
•Power off the projector after the computer or video tape recorder.
3 Press the STANDBY/ON button (control panel or remote control)
•The projector begins warming up and the STANDBY/ON indicator blinks green.
| • The STANDBY/ON indicator stops blinking | STANDBY/ON |
|
| |
| and lights to solid green once the |
|
| projector's power is completely on. |
|
4 | Remove the lens cap |
|
The picture is projected. |
|
15
