3M MP8790 manual Connecting Your Devices

CONNECTING YOUR DEVICES

Devices You Can Connect to the Projector (Refer to this section for planning your device configuration to use for your presentation.)

CAUTION • Incorrect connecting could result in fire or electrical shock. Please read the "Product Safety Guide" and this "Operator's guide".

ATTENTION Precautions to observe when connecting other devices to the projector

•Whenever attempting to connect other devices to the projector, please thoroughly read the manual of each device to be connected.

•TURN OFF ALL DEVICES prior to connecting them to the projector. Attempting to connect a live device to the projector may generate extremely loud noises or other abnormalities that may result in malfunction and/or damage to the device and/or projector. Refer to the “Technical” for the pin assignment of connectors and RS-232C communication data.

•Make sure that you connect devices to the correct port. Incorrect connection may result in malfunction and/or damage to the device and/or projector.

•Some cables may have to be used with core set. Use the accessory cable or a designated-type cable for the connection. For cables that have a core only at one end, connect the core to the projector.

•Secure the screws on the connectors and tighten.

Indicates the corresponding reference page

12 Display monitors

11 DVD players

11 VCRs

10 Laptop computers

10 Desktop computers

8