Multifunctional settings
IMAGE
menu
With the IMAGE menu, items shown in the table below can be performed.
Choose an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table.
MENU [RGB] |
| :SELECT |
PICTURE | ASPECT | 4:3 |
IMAGE | OVER SCAN | 95 |
INPUT | V POSITION | 25 |
SETUP | H POSITION | 142 |
SCREEN | H PHASE | 16 |
OPTION | H SIZE | 1344 |
EASY MENU | AUTO ADJUST EXECUTE | |
Item
ASPECT
OVER SCAN
VPOSITION H POSITION
H PHASE
Description
Using the buttons ▲/▼ switches the mode for aspect ratio.
At a RGB signal
4:3 16:9 NORMAL
At a video signal / no signal 4:3 16:9
•The NORMAL mode keeps the original aspect ratio of the signal.
•At a HDTV component video signal of 1125i (1080i) or 750p (720p), this item can’t be chosen.
•Performing the automatic adjustment initializes the aspect ratio setting.
Using the buttons ▲/▼ adjusts the
•This item can be chosen only at a video signal.
•When this adjustment is too large, certain degradation may appear at the frame area of the picture. In such a case, please adjust small.
•The number displayed on the menu during this adjustment is just for your reference , and might not be exact display ratio.
Using the buttons ▲/▼ adjusts the vertical position.
Up Down
Using the buttons ▲/▼ adjusts the horizontal position.
Left Right
Using the buttons ▲/▼ adjusts the horizontal phase to eliminate fl icker.
Right Left
•This item can be chosen only at a RGB signal or a component video signal (except 525i (480i) and 625i (576i)).
30
