Preparations
Using the remote control
CAUTION ► Be careful in handling the remote control. Incorrect handling could cause damage or malfunction.
•Do not drop or otherwise expose the remote control to physical impact.
•Do not get the remote control wet or place it on wet objects.
•Remove the batteries from the remote control and store them in a safe place if you won’t be using the remote control for an extended period.
•Replace the batteries whenever the remote control starts to malfunction.
•When strong lights such as direct sunlight or light from an extremely close range (such as from an inverter fl uorescent lamp) hit the projector’s remote sensor, the remote control may not function correctly. Adjust the direction of the projector to keep light from directly hitting the projector’s remote sensor.
The remote control works with the projector’s remote sensor.
approx. 3 meters
30º 30º
•The range of the remote sensor is 3 meters with a 60 degree range (30 degrees to the left and right of the remote sensor).
•Also a remote signal refl ected in the screen etc. may be available. If it is diffi cult to send a remote signal to the sensor directly, please try.
•Since the remote control uses infrared light to send signals to the projector (Class1 LED), be sure to use the remote control in an area free from obstacles that could block the remote control’s output signal to the projector.
8
