3M SCP7112 Picture Menu, Range, Feature, Default, Description

3M™ Super Close Projection System SCP712 Operator’s Guide

Picture Menu

The Picture Menu, shown below, is used to adjust the picture settings to display the best possible image.

Picture	Input Source: Computer 1
Picture Mode	Enhanced Photo ►
Brightness	50	···········●············
Contrast	50	···········●············
Color	50	···········●············
Tint	0	···········●············
Sharpness	0	···········●············
Video Noise Reduction		On
Aspect Ratio		Full Screen
Advanced

Reset

Feature	Description		Range	Default
Picture	Select the best mode to optimize the projector image.
Mode	1.	Max Brightness	N/A	VGA-Max Brightness
	2.	Enhanced Photo		Video-Enhanced Photo
	3.	Photo
	4.	Enhanced
Brightness	Adjust brightness of displayed image		0–100	50
Contrast	Adjust the contrast (dark to light) in the displayed image		0–100	50
Color	Adjust the intensity of color in the displayed image		0–100	50
(see Note)
Tint	Adjust the balance of red to green for video signals.		-15–+15	0
(see Note)
Sharpness	Adjust the displayed image to look sharper or softer		-15–+15	0
Video
Noise	Turn noise reduction ON or OFF		N/A	Off
Reduction
Aspect	Set aspect ratio to: [Full Screen or 16:9 or Native]		N/A	Full Screen
Ratio
	This option only displays for Computer2/Component2
Advanced	input and when I/O Module is connected. See next		N/A	N/A
	page.
Reset	Reset values in Picture menu only		N/A	N/A

Note: Tint/Hue can only be adjusted for S-Video and RCA video input signals

♥ 3M 2008. All Rights Reserved. 15