3M UMUV.10-045V2 user manual C. Installation Procedures, Using the System

AP-10AV / DP-10AV / DP-10AV Series User Manual

4. Using the System

C.Installation Procedures

This monitor is equipped with an auto-sensing power supply for voltage ranges 100~240V, 50~60Hz. Please follow the following instruction to install LCD monitor.

1.Make sure that the system power is turned off.

2.Plug the signal cable to the signal connector at the rear of PC and the rear of the LCD monitor.

3.Plug adapter output cable to the jack at the rear of LCD monitor and the power cord to the adapter.

4.Connect the power cord to power source.

5.Turn on the computer and the monitor.

6.Then push the OSD menu button and use the Auto Adjust function to fine the best mode of your computer.

Apr 05 P.14