WARNING (continued)
•To reduce the risk associated with the hot surface temperatures produced by the projection lamp, which if not avoided may result in death or serious injury:
-Never touch the projection lamp or surrounding surfaces while the lamp is still hot.
-Switch projector “OFF”, remove the power cord from the electrical outlet, and allow the unit to cool for at least 45 minutes before replacing the lamp.
•To reduce the risk associated with air or ground water contamination, which if not avoided could result in death or serious injury:
-The lamp in this product contains mercuy. Dispose of projection lamp in a manner that is consistent with your local hazardous waste regulations for mercury.
-For recycling and disposal information, contact your respective governmental agencies.
In U.S., contact the Electronic Industries Alliance at www.lamprecycle.org
In Canada, contact the Electronic Product Stewardship Canada at www.epsc.ca
CAUTION
•To reduce the risks associated with fire, explosion, chemical leakage, and/or poisoning, which if not avoided may result in minor or moderate injury and/or property damage:
-Use only the specified batteries with this remote control transmitter.
-Never mix old and new batteries.
-Use care to orient the plus (+) and minus
-Use and handle batteries in a manner that avoids damaging them.
-Keep batteries away from children and pets.
-Remove the batteries from the remote control when not to be used for an extended period.
•To reduce the risk associated with air or ground water contamination, which if not avoided may result in minor or moderate injury:
-Dispose of batteries in a manner that is consistent with your local hazardous waste regulations.
•To reduce the various risks associated with this product, which if not avoided may result in minor or moderate injury and/or property damage:
-Do not expose this projector to direct sunlight, or use it outdoors.
-Always operate the unit on a flat, sturdy, and horizontal surface.
-Never operate the unit in a vertical orientation such that the lens points up or down.
-Do not insert liquids or foreign object. To avoid penetration of foreign objects, do not put the projector into a case or bag together with anything except the accessories of projector, signal cables and connectors.
ENGLISH
© 3M 2004 | 3M™ Multimedia Projector S55/X45/X55 Product Safety Guide | 7 |
