Searching an input signal
1. Press the SEARCH button on the remote control.
The projector will begin to check its input ports in order to find any input signals.
Operating
STANDBY/ON
VIDEO RGB SEARCH
ASPECT | AUTO BLANK |
Then when an input is found, the projector will stop
searching and display the image. If no signal is found, the projector will return to the state selected before the operation.
RGB IN1 RGB IN2 COMPONENT VIDEO
Selecting an aspect ratio
1. Press the ASPECT button on the remote control.
Each time you press the button, the projector switches the mode for aspect ratio in turn.
At a RGB signal NORMAL 4:3 16:9
|
|
| STANDBY/ON |
VIDEO | RGB | SEARCH |
|
ASPECT |
| AUTO | BLANK |
MAGNIFY | HOME | PAGE UP | VOLUME |
At a video signal /no signal 4:3 16:9 SMALL
● The NORMAL mode keeps the original aspect ratio of the signal.
ON
●At a HDTV signal of 1125i (1080i) or 750p (720p) of COMPONENT VIDEO input, only 16:9 mode can be selected.
●Performing the automatic adjustment initializes the aspect ratio setting.
Adjusting the zoom and focus | Focus ring | Zoom knob | |
1. | Use the zoom knob to adjust the screen size. |
|
|
2. | Use the focus ring to focus the picture. |
|
|
19
