3M X45, S55, X55 EASY Menu, Description, Aspect, Keystone, Mode, Bright, Contrast, Color, Tint

Multifunctional settings

EASY Menu

With the EASY MENU, items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control. Then perform it referring to the following table.

EASY MENU

ASPECT	4:3
KEYSTONE	+0
MODE	NORMAL
BRIGHT	+0
CONTRAST	+0
COLOR	+0
TINT	+0
SHRPNESS	+3
WHISPER	NORMAL
MIRROR	NORMAL
RESET
FILTER TIME	0
LANGUAGE	ENGLISH

Go To Advance Menu...

Item	Description
ASPECT	Using the buttons ◄/► switches the mode for aspect ratio.
	See the item ASPECT of section IMAGE menu (29).
KEYSTONE	Using the buttons ◄/► corrects the keystone distortion.
	See the item KEYSTONE of section SETUP menu (33).
	Using the buttons ◄/► switches the mode of picture type.The
	modes of picture type are combinations of a mode of GAMMA and
	a mode of COLOR TEMP. Choose a suitable mode according to the
	projected source.
	NORMAL  CINEMA  DYNAMIC
MODE	NORMAL: (COLOR TEMP = MIDDLE) + (GAMMA = #1 DEFAULT)
	CINEMA: (COLOR TEMP = LOW) + (GAMMA = #2 DEFAULT)
	DYNAMIC: (COLOR TEMP = HIGH) + (GAMMA = #3 DEFAULT)
	• When the combination of GAMMA and COLOR TEMP differs
	from pre-assigned modes above, the display on the menu for the
	MODE is “CUSTOM”. Please refer to the items GAMMA (26) and
	COLOR TEMP (27) of PICTURE menu.
BRIGHT	Using the buttons ◄/► adjusts the brightness.
	See the item BRIGHT of section PICTURE menu (26).
CONTRAST	Using the buttons ◄/► adjusts the contrast.
	See the item CONTRAST of section PICTURE menu (26).
COLOR	Using the buttons ◄/► adjusts the strength of whole color.
	See the item COLOR of section PICTURE menu (27).
TINT	Using the buttons ◄/► adjusts the tint.
	See the item TINT of section PICTURE menu (27).

24