3M X55, X45 IMAGEMenu, Item, Description, At a RGB signal, At a video signal / no signal, Aspect

Multifunctional settings

IMAGE Menu

With the IMAGE menu, items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table.

MENU [RGB]		:SELECT
PICTURE	ASPECT	4:3
IMAGE	OVER SCAN	95
INPUT	V POSITION	25
SETUP	H POSITION	142
SCREEN	H PHASE	16
OPTION	H SIZE	1344
EASY MENU	AUTO ADJUST

Item

Description

	Using the buttons ▲/▼ switches the mode for aspect ratio.
	At a RGB signal
	4:3  16:9  NORMAL
	At a video signal / no signal
ASPECT	4:3  16:9  SMALL
	• The NORMAL mode keeps the original aspect ratio of the signal.
	• At a HDTV signal of 1125i (1080i) or 750p (720p) of COMPONENT
	VIDEO input, this item can't be selected.
	• Performing the automatic adjustment initializes the aspect ratio
	setting.
	Using the buttons ▲/▼ adjusts the over-scan ratio.
OVER SCAN	Large (It reduces picture)  Small (It magnifies picture)
	• This item can be selected only at a video signal.
	• When this adjustment is too large, certain degradation may appear
	at the frame area of the picture. In such a case, please adjust small.
V POSITION	Using the buttons ▲/▼ adjusts the vertical position.
	Up  Down
H POSITION	Using the buttons ▲/▼ adjusts the horizontal position.
	Left  Right
	Using the buttons ▲/▼ adjusts the horizontal phase to eliminate
	flicker.
H PHASE	Right  Left
	• This item can be selected only at a RGB signal or a component
	video signal.

29