Removing and Installing Ink Cartridges
Be sure you have a new ink cartridge before you begin. Once you start replacing a cartridge, you must complete all the steps in one session.
1.Make sure the printer is turned on (the green 
power light should be on, but not flashing). Then open the printer cover.
2.Press and release the 
ink button.
The print head moves to the left, and the cartridge that needs to be replaced stops under the 
ink out mark. The 
power light begins to flash.
Caution:
Don’t hold down the 
ink button for more than 2 seconds, or the printer will start to clean the print head.
To avoid damaging the printer, never move the print head by hand.
3.Press the 
ink button again.
■If more than one cartridge is empty, the next cartridge moves under the
ink out mark.
■If all the empty cartridges have been identified, the print head moves to the ink cartridge replacement position, as shown on the following page.
Removing and Installing Ink Cartridges 23