![](/images/new-backgrounds/1141138/14113871x1.webp)
Viewing System Parameters
Click on this link on the configuration page to view the entire system’s parameter set. The content is the same as those in
CONFIG.INI.
Maintenance
Three actions can be selected.
Reboot: Click the reboot button to restart the system.
Factory default: Click on the Factory Default button on the configuration page to restore the factory default settings. Any changes made will be lost and the system will be reset to the initial factory settings. The system will
restart and require the installer program to set up the network again. Upgrade firmware: Select the firmware file and click upgrade button.
- 32 -
www.4XEM.com