4XEM IPCAMW45 manual Set server parameter values, Return

Example: request IP address and its response

Request: http://192.168.0.123/cgi-bin/admin/getparam.cgi?network_ipaddress

Response:

HTTP/1.0 200 OK\r\n Content-Type: text/html\r\n Context-Length: 33\r\n \r\n network.ipaddress=192.168.0.123\r\n

Set server parameter values

Note: This request require administrator access

Method: GET/POST

Syntax:

http://<servername>/cgi-bin/admin/setparam.cgi? [nosync=<value>&]<parameter>=<value> [&<parameter>=<value>…][&return=<return page>]

parameter	value	description
<group>_<name>.	value to assigned	Assign	<value>	to	the	parameter
		<group>_<name>..
return	<return page>	Redirect to the page <return page> after the
		parameter is assigned. The <return page> can be a
		full URL path or relative path according to the current
		path. If you omit this parameter, it will redirect to an
		empty page.
		(note: The return page can be a general HTML
		file(.htm, .html) or a 4XEM server script executable
		(.vspx) file. It can not be a CGI command. It can not
		have any extra parameters. This parameter must be
		put at end of parameter list)
		- 35 -
					www.4XEM.com