![](/images/new-backgrounds/1141138/14113873x1.webp)
Appendix
A. Troubleshooting
Status LED
The following table lists the LED patterns which indicate camera status.
Status LED Color | Description |
Blinking Red | Power is being supplied to the camera. |
Steady Green | The camera is booting up. |
Blinking Orange & Green | The camera is trying to obtain an IP address. |
Steady Orange | An IP address is successfully assigned to the camera. |
Blinking Orange & Red | The camera is working. |
Fast Blinking Orange & Red | During firmware upgrading. |
Reset and Restore
There is a button in the back of the Network Camera. It is used to reset the system or restore the factory default settings. Sometimes resetting the system sets the system back to normal state. If the system problems remain after reset, restore the factory settings and install again.
RESET: Click on the button.
RESTORE:
1.Press on the button continuously.
2.Wait for
3.Free the button as soon as the second
Restoring the factory defaults will erase any previous settings. Reset or restore
the system after power on.
- 33 -
www.4XEM.com