U-Line Troubleshooting - Models with an electronic display, 1115R, 1175R, 29R, 1175BEV, Remedy

Troubleshooting - Models with an electronic display:

PROBLEM	POSSIBLE CAUSE	REMEDY
Electronic display is blank and	Unit is in blackout/Sabbath mode	Exit blackout/Sabbath mode (not Star K certified)
interior light is off with door open.	(not Star K certified).	(See OPERATION).
Electronic display is blank and	A display function has changed.	Touch and hold the WARMER button and touch and
interior light is on with door open.		release the ON/OFF button three times, then release the
		temperature button. The display should become visible.
Electronic display shows repeating,	A factory control mode has been	Touch and hold the warmer temperature button and
randomly flashing symbols and	inadvertently entered.	touch and release the LIGHT button three times, then
partial characters.		release the temperature button to exit the factory
		control mode. The set-point temperature should now
		be displayed.
Electronic display shows:	A factory control mode has been	Repeatedly touch the WARMER button to advance any
0, 1 to 16, or 99.	inadvertently entered.	number shown to 99 and touch and release the LIGHT
		button. The set-point temperature should now be
		displayed.
Electronic display shows one or	The unit is displaying an error code.	Record the error code(s) displayed and call for service.
more of the following:
E1, E2, E4, E5, E6.

26 1115R, 1175R, 29R, 1175BEV