U-Line manual Door Shelf Removal/Insertion, 1115R, 1175R, 29R, 1175BEV

ULIN_0143_A

Figure 45

14.Fasten upper hinge to unit (three screws) (Figure 45). Partially tighten screws until door is aligned.

15.Adjust door to assure proper seal. Tighten upper hinge screws securely.

16.Replace three plastic plugs removed in Step 11 into holes on top of unit. Replace screws in holes in bottom of unit, opposite side.

17.Re-inspect door seal and alignment. Adjust if needed.

	2
1	ULIN_0198_A

Figure 46

18.Make sure grille cap is behind grille in slots provided in grille (Figure 46, 1) before attaching grille to unit, and secure but do not overtighten both grille screws (Figure 46, 2).

Door Shelf Removal/Insertion

1

2

ULIN_0040_A

Figure 47

NOTE: 1115R and 1175R models only

To remove the door shelf:

1.Grasp shelf in center, and lift until the shelf notches (Figure 47, 1) clear the bosses (Figure 47, 2).

2.Carefully pull the shelf away from the door.

To install the door shelf:

1.Holding the shelf in the center, center the shelf in the door at the desired location, slightly above the bosses (Figure 47, 2).

2.Lower the shelf onto the bosses (Figure 47, 2).

1115R, 1175R, 29R, 1175BEV 21