U-Line 29R Initial Startup, Interior Lighting, Operation, Models 1115R, 1175R and 1175BEV

5 Operation

ULIN_0126_A

Figure 2

IMPORTANT

Proper air flow (Figure 2) is required for your unit to operate at its highest efficiently. A grille, located in the base of the unit, must not be blocked at any time, or your unit will not perform as expected.

Initial Startup

All U-Line units are shipped with controls that are preset. No initial adjustments are required.

IMPORTANT

U-Line recommends the unit be allowed to run overnight prior to loading with product.

1

ULIN_0127_A

Figure 3

Models 1115R, 1175R and 1175BEV

To turn the unit ON or OFF, press and hold the ON/OFF button (Figure 3, 1) for approximately ten seconds and release. The display will show the unit set-point temperature when turned ON and display OFF when the unit is OFF.

Model 29R

To turn unit off: Turn the controller knob located in the center of the grille counterclockwise until a “click” is heard. It may take some force to get the control to “click.”

To turn unit on: Turn the controller knob located in the center of the grille clockwise to a MID setting, number 3 or 4 on the controller knob.

Interior Lighting

Model 1115R, 1175R and 1175BEV

The interior of the cabinet can be illuminated whenever the door is opened or remained darkened for a 36-hour period (blackout/Sabbath mode [not Star K certified]).

1	2	3	4	5
			ULIN_0074_A

Figure 4

The LIGHT button (Figure 4, 1) on the control panel is used to change the lighting functions.

To turn the lights and display OFF for a preset 36-hour interval (blackout/Sabbath mode [not Star K certified]):

1.Press and hold the LIGHT button (Figure 4, 1) for ten seconds and release (the °F symbol will flash briefly at the end of the ten second period).

2.The interior light and control display (Figure 4, 3) will go dark for the next 36 hours.

NOTE: Although the display will not be visible, the temperature controls in the unit remain active, and the interior temperature will be maintained.

3.To exit the blackout/Sabbath mode (not Star K certified) before the 36-hour period, repeat Step 1.

Model 1175BEV has another mode of lighting available. To illuminate the interior of the cabinet for a timed four- hour period:

1.Press and release the LIGHT button (Figure 4, 1) to switch from door-operated lighting control to the timed four hour lighting period (the °F symbol will flash briefly after the LIGHT button is pressed).

2.At the end of the four-hour period, the light will turn OFF and door-operated lighting control will resume.

3.To exit the timed lighting control before the end of the four-hour period, repeat Step 1.

1115R, 1175R, 29R, 1175BEV 7