A&D UA-767NFC instruction manual Button until a

Measurements

Measurement with the Desired Systolic Pressure

Model UA-767NFC is designed to detect the pulse and to inflate the cuff to a systolic pressure level automatically.

Use this method when re-inflation occurs repeatedly or when the results are not displayed even if the pressure decreases to 20 mmHg or less.

1.	Place the cuff on the arm (preferably the left arm). At heart level
2.	Press and hold the				button until a
			START				Press and hold
	number about 30		to 40		mmHg higher			START
	than your expected systolic pressure						the button
	appears.
						Release the button
3.	When the desired number is reached,
							at the desired
	release the			button to start		systolic pressure
		START
	measurement.	Continue to measure
	your blood pressure as described on
	the previous page.
							Refer to the previous page
							for measurement

Notes for Proper Measurement

Sit down in a comfortable position. Place your arm on a table with your palm facing upward and the cuff at the same level as your heart.

Relax for about five to ten minutes before taking a measurement. If you are excited or depressed by emotional stress, the measurement will reflect this stress as a higher (or lower) than normal blood pressure reading and the pulse reading will usually be faster than normal.

An individual's blood pressure varies constantly, depending on what you are doing and what you have eaten. What you drink can have a very strong and rapid effect on your blood pressure.

This device bases its measurements on the heartbeat. If you have a very weak or irregular heartbeat, the device may have difficulty determining your blood pressure.

Should the device detect a condition that is abnormal, it will stop the measurement and display an error symbol. Refer to page 5 for the description of symbols.

This blood pressure monitor is intended for use by adults only. Consult with your physician before using this device on a child. A child should not use this device unattended.

13