Using the Monitor
Notes on the
The monitor displays the clock as long as power is connected. Adjust the clock prior to use.
The current clock setting will be cleared if the batteries are removed, or power is not connected for approximately 30 seconds while the AC adapter is used. In this case, adjust the clock again.
When adjusting the clock, press the 
button to increase the value by
one, or press and hold the 
button to change the value continuously. The setting procedure cannot be reversed. If the wrong value is set, start the setting procedure again.
After 30 seconds of
To cancel the operation anytime, press the START button. During measurement, the clock adjustment is not available.
Selecting the Clock Mode
Two clock modes are available,
1. Press and hold the | button | Press and hold |
until the year starts blinking. | ||
2. Press and hold the 
button. “12H” appears on the display.
3.Press the 
button to switch between “12H” and “24H”.
4.Press the 
button to display the clock in the selected mode.
Press and hold 
Press 
clock
clock
8
