Connecting to the Network and to Power
Power Adapter
Use the power adapter (provided by your System Administrator) with your phone and plug your phone into a power source.
Inline Power Provided
If your network provides 802.3af compliant
1.On the top of your phone, connect the Ethernet cable (provided with your phone) into the network port marked with LAN.
2.Plug the other end of the Ethernet Cable directly into the network jack on the wall.
|
| Ethernet |
| |
|
| Cable | To Network | |
Network Jack | ||||
| ||||
(if Inline power provided, |
| |||
do not install the power adapter) |
| |||
|
|
|
| |
|
|
|
| |
Note: The PC jack on the 51i does not supply inline power onto other network devices. All Ethernet cables used must be minimum category 5/5e straight- through cables, such as the cable provided with your phone.
Model 51i IP Phone Installation Guide | 9 |
Installation and Setup
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030
