Installation and Setup
Inline Power Not Provided
If your network does not provide 802.3af compliant
1.On the top of your phone, connect the Ethernet cable (provided with your phone) into the network port marked with LAN.
2.On the PoE power injector, plug the other end of the Ethernet cable into the network jack marked as indicated in the following illustration.
3.On the PoE power injector, connect an additional Ethernet cable into the network port as indicated in the following illustration.
4.Plug the other end of the Ethernet cable into the network jack on the wall.
5.Plug the PoE power injector into a power outlet.
PoE |
|
| |
Power injector | Ethernet |
| |
(if Inline power or the | Cables | To PoE | |
power adapter are | |||
| |||
not provided) |
|
|
Network Jack
Power Outlet
To Network
To Phone
Jack
Note: You should connect the power supply to a surge protector or power bar. All Ethernet cables used must be minimum category 5/5e
10Model 51i IP Phone Installation Guide
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030