Aastra Telecom 6739I Settings in the Telephone, Shortcut Keys, Mute, Volume, Label and the number

Aastra 6739i Quick Reference Guide

English

Settings in the Telephone

Shortcut Keys

Some shortcuts can be programmed by the user, while others require administrator rights. The user shall normally only program speed dial keys.

Do not program shortcut on softkeys 1-8, because these keys may be overwritten by the system.

The figure below shows the key numbering which is

shown after pressing and then touch Softkeys:

1	6	11	16
2	7	12	17
3	8	13	18
4	9	14	19
5	10	15		...

The system administrator can program keys from key number 9 and upwards with speed dial or monitoring numbers. Check with the system administrator which policy that is valid in the exchange in your company.

The shortcuts are shown as the softkeys on the sides of the screen in idle mode.

Program a new	and then touch Softkeys
shortcut:	Touch the softkey to add. Available
	softkeys are from key number 9 and
	upwards
	Set Type = Speeddial, enter the
	label and the number
Edit a shortcut:	and then touch Softkeys
	Touch the softkey to edit
Delete shortcut:	and then touch Softkeys
	Touch the softkey to edit
	Choose type None

Settings in the Telephone

Shortcut Keys(Continued)

Initiate a new	Operation > Softkeys and XML
shortcut via the web	Available sofkeys are from key
interface
	number 9 and upwards
	Set Type = Speeddial, enter the
	label and the number
Edit shortcuts via the Operation > Softkeys and XML
web interface	Edit the shortcut that you want to
	change

Mute

Mute microphone	Press	or softkey Mute
during call:
Silent ringing:		Audio > Ring Tone >
	Silent

Note: The ring signal is switched off permanently

Volume

Adjust the listening Press volume of the:

-Handset

-Headset

-Ringer

-Hands-free

MX-ONE – Aastra 6739i 9