Basic Installation
Basic Installation
1. Connect the Handset
Attach one end of the coiled handset cord to the handset and the other end to the
handset porton the back of the tele- phone.
Route the handset cord along the groove leading off the side of the telephone as shown in the illustration.
2.Connect the Cords
Plug one end of the telephone cord into on the back of the telephone and the other end to the phone jack.
Connect the small end of the power adaptor to the port on the back of the telephone, and plug the other end into an electrical outlet.
1
3. Attach the Stand for Desk Mount
If you plan to mount the telephone on the wall, you do not need to attach the stand.
Lower the stand as shown below into | Slide the stand in the direction shown |
the slots on the back of the telephone. | below until it clicks into the locked position. |
5