Changing the display language
For changing business requirements, you may wish to change the language of your display messages and prompts. There are three language choices available for your telephone (English, French and Spanish).
To change the display language:
1.Press I. Set Language appears on the display.
2.Press K. The language indicators E, F ,S appear on the display for English, French and Spanish. The current selection is indicated by the ßashing letter.
3.Use Uor Tto change the selection.
4.Press K.
Setting the date and time
If you subscribe to the Caller ID service from your telephone company, the date and time are set automatically after you receive your Þrst incoming call. If you do not sub- scribe, you must set the date and time manually.
To set the date and time:
1.Press I.
2.Press Vonce. Display indicates Set Time/Date.
3.Press K. Display shows time and date. Use Wand Vto adjust the ßashing time and date and TUto move to the next Þeld. To change the AM/PM indi- cator, adjust the time ahead by 12 hours.
4.Press K.
To resume the automatic date and time setting (if the date and time has been set man- ually), disconnect the power supply, then
Adjusting the Handset and Speaker volume
Press the left or right side of the volume bar Rto adjust the volume on the handset or speaker. The volume remains at the level selected until the next time you change it.
Adjusting the Ringer Volume
The ringer volume is controlled by a three position switch on the back of the Model 9116. The ringer volume can be set to be off, low or high.
Making and Answering Calls
Technical Manuals Online! -
10