LOCATION OF CONTROLS AND FEATURES
CHOOSING A LOCATION
Base Back View
Data Jack
Used for connecting a telephone device such as a computer modem or fax machine.
Do the following:
•Choose the best location
•Connect the phone
•Choose the dialing mode
Away from heat sources, such as radiators, air ducts, and sunlight
Away from VCRs and TV sets and other electronic equipment
Away from noise sources such as a window by a street with heavy traffic
Antenna
Data Jack
!
Base Bottom View
Near a central location and on a level surface
Away from a microwave oven
Away from a personal computer
Away from excessive moisture, extremely low temperatures, dust, mechanical vibration, or shock
Ringer Switch
Tone/Pulse Switch 
Ring Count Switch 
Answer Switch
Ringer Switch (On/Off) Used to set the base ringer On or Off.
Tone/Pulse Switch Used to set the dialing method for tone or pulse dialing.
Ring Count Switch (2/4/TS) Used to set the number of rings before the answering machine picks up to either 2, 4, or Tollsaver 2/4 (TS) rings.
Where you place the phone affects the reception quality of the handset:
•Away from another cordless telephone
•Place the base near an AC electrical outlet and near telephone line jack
•Place the base away from metal walls and metal file cabinets
CAUTION: The cordless telephone operates at a frequency that may cause interference to nearby TVs and VCRs; the base phone should not be placed near, or on top of a TV or VCR. If interference is experi- enced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference.
Answer Switch (Only/ICM)
Used to set the phone to answer and let the caller leave a message (ICM) or only play the announcement and not let the caller leave a message (ONLY).
Note: While the 2.4GHz frequency is inherently clearer, we suggest that you do not use this phone within 20 feet of a working microwave. The microwave produces frequencies in this range which may cause interference. This interference is normal for all 2.4GHz phones and should not be considered a product defect.
11 | 12 |
