AB Soft 1760 manual Important User Information

Important User Information	Solid state equipment has operational characteristics differing from those of
	electromechanical equipment. Safety Guidelines for the Application,
	Installation and Maintenance of Solid State Controls (Publication SGI-1.1
	available from your local Rockwell Automation sales office or online at
	http://www.ab.com/manuals/gi) describes some important differences
	between solid state equipment and hard-wired electromechanical devices.
	Because of this difference, and also because of the wide variety of uses for
	solid state equipment, all persons responsible for applying this equipment
	must satisfy themselves that each intended application of this equipment is
	acceptable.
	In no event will Rockwell Automation, Inc. be responsible or liable for
	indirect or consequential damages resulting from the use or application of
	this equipment.
	The examples and diagrams in this manual are included solely for illustrative
	purposes. Because of the many variables and requirements associated with
	any particular installation, Rockwell Automation, Inc. cannot assume
	responsibility or liability for actual use based on the examples and diagrams.
	No patent liability is assumed by Rockwell Automation, Inc. with respect to
	use of information, circuits, equipment, or software described in this manual.
	Reproduction of the contents of this manual, in whole or in part, without
	written permission of Rockwell Automation, Inc. is prohibited.
	Throughout this manual, when necessary we use notes to make you aware of
	safety considerations.

WARNING

Identifies information about practices or circumstances that can cause an explosion in a hazardous environment, which may lead to personal injury or death, property damage, or economic loss.

IMPORTANT

Identifies information that is critical for successful application and understanding of the product.

ATTENTION

Identifies information about practices or circumstances that can lead to personal injury or death, property damage, or economic loss. Attentions help you:

•identify a hazard

•avoid a hazard

•recognize the consequence

SHOCK HAZARD

Labels may be located on or inside the equipment (e.g., drive or motor) to alert people that dangerous voltage may be present.

BURN HAZARD

Labels may be located on or inside the equipment (e.g., drive or motor) to alert people that surfaces may be dangerous temperatures.