Drawing a Circuit with Pico | |
|
|
Text Display
The Text Display is used to display eight freely definable messages on the Pico screen. Each text block displays up to 48 characters from the Pico display character set (ASCII + Pico special characters). If the Text Display is enabled, the text entered via PicoSoft is displayed. If several Text Displays are enabled, the next screen is displayed every 4 seconds. When Text Display D1 is enabled it stays displayed (fault indication).
Press Ok to switch to the menus at any time.
Current values or parameters of function relays can be displayed in lines 2 and 3.
Examples:
Fault Signals
CAUTION!
PUMP 1
MOTOR
MALFUNCTION
Display Counter Value
QUANTITY
ACTV 0042
PCS
SETP0100
Time with Text Display
THE TIME
IS
14:42
Display Current Value and Parameter of Timing Relay
TIME RELAY 1
SETP99.00 S
ACTV 42.00 S
Publication